top of page

Hydrogen Carbon Cleaning for Toyota GR Yaris (G16E-GTS Engine) in Nagano

  • 孝一 田﨑
  • 2 days ago
  • 5 min read

Customer's Car: Toyota GR Yaris (G16E-GTS) We recently performed a hydrogen gas carbon cleaning service on a customer's Toyota GR Yaris in Nagano Prefecture!

The vehicle's current mileage is approximately 55,590 km.

Under the hood is Toyota’s renowned G16E-GTS engine—a 1,618cc in-line 3-cylinder intercooled turbo engine. It puts out an impressive maximum output of 272 ps (200 kW) at 6,500 rpm and a maximum torque of 37.7 kg·m (370 N·m) at 3,000–4,600 rpm.

This is Toyota's pride and joy: a newly developed, compact, lightweight, high-spec, and high-power engine that controls both direct and port fuel injection systems via D-4ST technology. When you think of the GR Yaris, its incredible success in the WRC (World Rally Championship) and the All Japan Rally Championship instantly comes to mind!

We had the pleasure of performing this service at the [2026 GR Yaris Owners Meeting in Jibusaka Kogen Ski Resort]. This time, the owner chose our engine refresh service as a preventative maintenance measure to keep the car running in peak condition for years to come.

After completing initial checks and preparations—including monitoring engine sound, vibrations, and exhaust emissions—we began injecting the hydrogen gas. We started at a rate of 100 L/h, carefully monitoring the engine's condition while gradually increasing the hydrogen flow.

Scroll down below for the live updates! ↓↓↓

[In-Progress Impression / Results]

長野県 トヨタ GRヤリス・G16E-GTS型水素ガスカーボンクリーニング施工実施
長野県・トヨタGRヤリスのG16E-GTS型エンジンへの水素ガスカーボンクリーニング施工の様子。
長野県 トヨタ GRヤリス・G16E-GTS型水素ガスカーボンクリーニング施工実施
長野県・トヨタGRヤリスのG16E-GTS型エンジンへの水素ガスカーボンクリーニング施工の様子。
長野県 トヨタ GRヤリス・G16E-GTS型水素ガスカーボンクリーニング施工実施
長野県・トヨタGRヤリスのG16E-GTS型エンジンへの水素ガスカーボンクリーニング施工の様子。
長野県 トヨタ GRヤリス・G16E-GTS型水素ガスカーボンクリーニング施工実施
長野県・トヨタGRヤリスのG16E-GTS型エンジンに水素ガスカーボンクリーニングを施工。
長野県 トヨタ GRヤリス・G16E-GTS型水素ガスカーボンクリーニング施工実施
長野県・トヨタGRヤリスのG16E-GTS型エンジンの水素ガスカーボンクリーニング施工を示すメーターパネル、走行距離は55,596km。

[In-Progress Impression] ↓↓↓

5 minutes into the service: Placing a hand near the exhaust tip, a slight trace of moisture can be felt. We checked the exhaust pressure and flow; while the pressure is perfectly fine, there is a slight pulsation (unevenness) in the exhaust flow. We revved the engine briefly to check the idling gauge, which shows no immediate issues. We will proceed with the carbon cleaning while monitoring these symptoms closely.

We began gradually adjusting the hydrogen injection volume, carefully checking the engine's response step by step.

10 minutes in: Water vapor has started visibly coming out of the exhaust tailpipe.

20 minutes in: We can already feel and hear a noticeable reduction in engine noise and vibration. The engine is smoothing out. At this point, we locked in the hydrogen injection rate to maintain this optimal cleaning state.

45 minutes in: Testing the exhaust tip again with a hand, the slight pulsation we noticed earlier is completely gone—the exhaust flow is now incredibly smooth! We revved the engine once more to check the idling gauge. The RPM needle now drops back down to idle much more smoothly and responsively than it did before the service. We will continue the treatment while fine-tuning the hydrogen levels.

50 minutes in: The moisture at the exhaust tip is beginning to dry up. We continue the process while keeping a close eye on the hydrogen adjustments.

60 minutes in (Final Check): After 60 minutes of precise hydrogen adjustment, we confirmed that the engine idle, sound, vibration, and exhaust flow have all stabilized perfectly. The engine feels completely refreshed.

With all parameters looking excellent, we successfully completed the service!

[Post-Service Impressions from the Owner] ↓↓↓

長野県 トヨタ GRヤリス・G16E-GTS型水素ガスカーボンクリーニング施工実施
長野県・トヨタGRヤリスのG16E-GTS型エンジンへの水素ガスカーボンクリーニング施工の様子。
長野県 トヨタ GRヤリス・G16E-GTS型水素ガスカーボンクリーニング施工実施
長野県・トヨタGRヤリスのG16E-GTS型エンジンへの水素ガスカーボンクリーニング施工の様子。
長野県 トヨタ GRヤリス・G16E-GTS型水素ガスカーボンクリーニング施工実施
長野県・トヨタGRヤリスのG16E-GTS型エンジンへの水素ガスカーボンクリーニング施工の様子。
長野県 トヨタ GRヤリス・G16E-GTS型水素ガスカーボンクリーニング施工実施
長野県・トヨタGRヤリスのG16E-GTS型エンジンへの水素ガスカーボンクリーニング施工の様子。

[Post-Service Impressions from the Owner] ↓↓↓

  • "Before the service, the initial throttle response felt a bit sluggish, but now it takes off effortlessly and smoothly!"

  • "Merging onto the highway feels amazing now! The engine revs beautifully, and the acceleration is incredible. It’s a huge difference!"

We are absolutely thrilled that the owner could feel the immediate benefits of our service!

Carbon buildup hurts engine condition and performance far more than most people realize. By removing stubborn carbon deposits from the intake, pistons, and especially the exhaust valves, while also clearing out inside the exhaust system, you significantly improve exhaust efficiency.

When exhaust efficiency increases, the engine can pull in fresh air much more effectively. This dramatically boosts combustion efficiency, making it easier for the engine to deliver its full power and torque. We are so glad to hear that the overall drivability of the GR Yaris has been greatly improved!

Giving your engine a deep refresh like this truly brings the car back to life. In many cases, the effects become even more noticeable after driving for a little while longer, so please keep an eye on how she performs!

It was an absolute pleasure meeting you, and we look forward to seeing you again at future events.

Thank you so much for choosing our service! If you ever need anything or have any questions, please feel free to reach out to us anytime.

Wishing you many more happy miles ahead!


「一台一機」に合わせたオーダーメイド施工  e-BLUE   が選ばれる理由!。同じ車種、同じエンジンでも、コンディションやカーボンの溜まり方は、一台ごとに全く異なります。 e-BLUEでは、多数の検証を重ねた施工を実施。
オーダーメイド施工で愛車のコンディションを最適化するe-BLUE。エンジンの声を聴くプロ技術とリアルタイムな水素調整で、他にはない洗浄効果を実現。


何かありましたら、いつでもご相談・お問合せ下さい。


今後とも、e-BLUE・水素ガスカーボンクリーニングを よろしくお願い致します。


施工予約・お問い合わせは、お電話・メールでお願い致します。


メールは、確認次第返信を入れますのでお待ち下さい。


よろしくお願い致します。



電話:09082621052



当ショップの Instagram、X(旧Twitter)、Facebook からのDM、メッセージ、公式LINEからご連絡して頂いても構いません


是非、公式LINEのお友達になって下さいね。


                  公式LINE QRコード

e-BLUE公式LINEQRコード

#G16EGTS

#GXPA16



 
 
 

Comments


e-BLUE internal combustion engine/hydrogen gas carbon cleaning

イーブルー 田﨑 孝一

TEL : 090-8262-1052

FAX : 0767-22-5312

e-BLUE水素ガスカーボンクリーニング画像

©2022 e-BLUE Hydrogen gas carbon cleaning inside the internal combustion engine. Created with Wix.com.

bottom of page